1996-1999, Power Machinery Engineering, Shanghai Jiao Tong University, Ph.D
1993－1996, Internal combustion engine, Shanghai Jiao Tong University, Master
1989-1993, Thermal Engineering & Applied Mathematics, Shanghai Jiao Tong University, Bachelor

2013.01- Professor, School of Mechanical and Power Engineering, Shanghai Jiao Tong University
2001.09-2012.12 Associate Professor, School of Mechanical and Power Engineering, Shanghai Jiao Tong University
1999.08-2001.08 Lecture, School of Power Engineering, Shanghai Jiao Tong University

2010.07-2010.10 Visiting Scholar, University of California, San Diego
2003.09-2003.12 Visiting Scholar, University of Michigan

Recruiting graduated students, as well as postdoctoral fellows.

I. Multi-field and multi-scale modeling and computation
(1) Tribological molecular dynamics simulation
(2) Tribodynamics of power machinery
(3) Thermo-fluid-solid coupling analysis and optimization design of power system

2. Intelligent simulation and digital twin
(1) AI-based real-time simulation methods
(2) Digital twin technology of power system

3. Reliability and health prediction of power system
(1) Multi-factor failure mechanism
(2) Reliability and health prediction model

2022-2025 Ministry of Industry and Information Technology Project: Key Technology for High Reliability Design and Verification of Marine Engines, PI
2022-2024 National Project: Simulation Technology of Piston Pin Friction Pair, PI
2022-2025 National Natural Science Foundation of China (NSFC): Study on Rub-impact Mechanism and Vibration Supression of Reciprocating Friction Pairs of Two Stroke Marine Diesel Engines, PI
2022.1-2022.12 Joint Foundation for Foresight Innovation, PI
2020-2022 National Project: Engine Reliability Verification Methodology, PI
2019-2021 The Key lab foundation "Burst analysis of turbine disk with defects", PI
2016-2020 The Project of Ministry of Industry and Information Technology” Fatigue and reliability based design for engine parts”, PI
2016-2020 The Project of Ministry of Industry and Information Technology” Noise and vibration control of marine diesel engine”, PI
2017-2020 National project” Fretting wear and fatigue of diesel engine “, PI
2018-2019 The state key lab foundation “research on fretting fatigue of joint face between main bearing and cast-iron engine block” PI
2011-2015 National Project” Turbocharging system design” PI
2011-2015 National Project “Self-adaption control of turbocharging system”, PI

Gao, L., Cui, Y.*, Xu, Z., Fu, Y., Liu, S., Li, Y., & Hou, X. (2023). A fully coupled tribo-dynamic model for piston-ring-liner system. Tribology International, 178, 107998.
Xing, M., Zhang, B., Deng, P., Xu, J., & Cui, Y.* (2023). A comprehensive analysis of contact kinematics for planetary roller screw mechanism. Tribology International, 179, 108127.
Xing, M., Zhang, B., Deng, P., Xu, J., & Cui, Y.* (2022). A novel wear prediction model for planetary roller screw based on universal sliding distance model. Tribology International, 175, 107851.
Liu, S., Cui, Y.*, Fu, Y., Li, B., Lv, B., & Qian, Y. (2022). Tribo-dynamic performances and vibration transmission of lubricated translational joints in marine engines. International Journal of Mechanical Sciences, 231, 107599.
Zhang, H., Liang, G., Qiao, X., Li, L., Zhang, G., & Cui, Y.* (2022). Experimental and numerical studies of thermal-structural behavior based on cast iron scaled cylinder head specimen. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062221126817.
Li, B., Cui, Y.*, Liu, S., Liu, Y., Wang, X., & Ding, Z. (2022). Experimental and numerical study based on ductile failure for the tri-hub burst of turbocharger turbine. Engineering Failure Analysis, 138, 106295.
Li, B., Cui, Y.*, Liu, S., Huang, R., Fu, Y., & Ding, Z. A coupled plasticity-damage model of K418 nickel-based superalloy with pressure and temperature dependence[J]. Engineering Failure Analysis, 2022, 136: 106166.
Li, B., Cui, Y.*, Fu, Y., Deng, K., Tian, Y., & Liu, S. Marine diesel exhaust manifold failure and life prediction under high-temperature vibration[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2022: 09544062211064957.
Shuo Liu, Yi Cui*, Yan Fu, Bin Li, Binglin Lv, Yuehua Qian, Modeling of lubricated translational joints in rigid-partially flexible multibody systems and its application in two-stroke marine diesel engines, Tribology International, Volume 165, 2022, 107244
Haotian Chen, Kun Zhang, Kangyao Deng, Yi Cui*,Real-time engine model development based on time complexity analysis,International Journal of Engine Research, First Published August 2021, 10.1177/14680874211039706
李云強，王一，黃日寧，趙奎奎，崔毅*. 內燃機連桿大端軸瓦微動磨損及疲勞研究[J]. 內燃機學報, 2021, 39(6):8.
Yi Wang, Liang Gang, Shuo Liu, Yi Cui*, Coupling Fractal Model for Fretting Wear on Rough Contact Surfaces, Journal of Tribology, September 2021, Vol.143, 091701-1
Shuo Liu, Yi Cui*, Yi Wang, Yan Fu, Binglin Lv, Yuehua Qian，The effect of lubricant film on the dynamic response and signal transmission of moving load dynamic problems，Mechanical Systems and Signal Processing，151 (2021) 107435
Limin Wu, Yan Fu, Mei Li, Gang Liang, Yanting Zhang and Yi Cui*. The effects of material and structure of main bearing caps on crankshaft lubrication of diesel engine[J]. International Journal of Engine Research, 2021, Vol.22(4):1086-1100
Yi Wang, Liang Gang, Shuo Liu, Yi Cui*, Coupling Fractal Model for Fretting Wear on Rough Contact Surfaces, Journal of Tribology, September 2021, Vol.143, 091701-1
Wang Y, Cui Y*, Liu S, Xinhui Wang, Xinwei Tian, Xumao Zhai. Contact Analysis of a Soft-Coated Asperity During Loading–Unloading Process in Consideration of Strain Hardening Effects[J]. Journal of Tribology, 2020, 142(6).
Yi Wang, Limin Wu, Shuo Liu, Mei Li, Xianghui Meng, Yi Cui*, Numerical Study on Fretting Wear of Mating Surface Between Piston Crown and Skirt in Heavy Duty Diesel Engine, J. Eng. Gas Turbines Power 141(8),081013 AUG 2019
Wang, Y., Wu, L., Liu, S., Li, M., & Cui, Y.* (2018). Fretting fatigue optimization of piston skirt top surface of marine diesel engine. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(4):1453-1469, FEB 2019
Liu S, Cui Y*, Wang Y, et al. An evaluation method for transient response performance of turbocharged diesel engines[J]. Energy, Volume 182, 1 September 2019, Pages 852-863
王一，李林劍，巫立民，李 梅，崔 毅*，基于微動特性的組合活塞頂裙結合面優化設計,內燃機學報, Vol.36(4), 2018: 369-376
Liu R, Meng X*, Cui Y. Influence of numerous start-ups and stops on tribological performance evolution of engine main bearings[J]. International Journal of Engine Research, 2018: 1468087418810094.
Bo Zhao, Yi Cui, Youbai Xie and Kun Zhou*. Dynamics and lubrication analyses of a planar multibody system with multiple lubricated joints[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2017: 1350650117713891.
Zhao B, Shen F, Cui Y, et al. Damage analysis for an elastic-plastic body in cylindrical contact with a rigid plane[J]. Tribology International, 2017, 115: 18-27.
林金國，傅達，夏占，李玉穩，李林劍，崔毅*. 特殊用途重載軸承滾子型線參數的優選設計[J]. 船舶工程, 2017,39(3):35-39.
莫靜； 崔毅*； 陳志忠,曲軸應力集中系數的船規計算與有限元方法的比較及優化,內燃機工程, Vol.37, No.5, 2016.10,pp215-220
Cui Yi*, Wang Mingwu, Tong Ling, Fatigue Strength Reliability Analysis of Diesel Connecting Rod Based on Stochastic Finite Element Method., Journal of Engineering for Gas Turbines and Power, Transactions of the ASME 1999 Volume 121, Number 4 pp741-745
崔毅，陳大榮，王明武, 柴油機連桿可靠性分析研究, 內燃機工程，Vol.19, No.3,1998,pp50-55
崔毅，王明武，李邦義, 單光束激光散斑干涉法測量?jī)?nèi)燃機連桿的變形, 內燃機學報 1998 VOL.16 No.3 pp360-364
王明武，崔毅, 攝動隨機有限元方法分析連桿應力, 內燃機學報，Vol.16, NO.2,1998,pp226-231

Kun Zhang, Xinyu Huang, Sai He, Kangyao Deng, Yi Cui*, and Aiqiang Luo, Study of a hybrid modular exhaust turbocharging system and its application on an 8-cylinder marine diesel engine,Journal of Mechanical Science and Technology 30 (6) (2016) 2827~2838
M. XU, Y. C. SUN, Y. CUI*, K. Y. DENG and L. SHI, ONE-DIMENSIONAL MODEL ON FUEL PENETRATION IN DIESEL SPRAYS WITH GAS FLOW, International journal of automotive technology, Vol.17, No.1, pp.109-118(2016)
Hu ZL; Gui Y; Xu M; Deng KY; Cui Y; Dou JY, Design of a variable valve hydraulic lift system for diesel engine，JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY，29(4):1799-1807, APR 2015
Yi Cui, Haiyong Peng, Kangyao Deng, Lei Shi, The effects of unburned hydrocarbon recirculation on ignition and combustion during diesel engine cold starts, Energy, Volume 64, 1 January 2014, Pages 323–329
Yi CUI and Kangyao DENG，Thermodynamic model and optimization of a miller cycle applied on a turbocharged diesel engine，Journal of Thermal Science and Technology，Vol.9, No.1, 2014， Paper No.13-00015
Yi Cui, Zhilong Hu, Kangyao Deng and Qifu Wang, Miller-Cycle Regulatable, Two-Stage Turbocharging System Design for Marine Diesel Engines, J. Eng. Gas Turbines Power FEBRUARY 2014, Vol. 136 / 022201-1-022201-8
Yi Cui, Kangyao Deng, Zhe Zhang, Transient performance of three phases sequential turbocharging with unequal size turbochargers, 27th CIMAC World Congress on Combustion Engine Technology, shanghai MAY 13th-16th,2013, paper No.213
Yi Cui, Kangyao Deng, Lei Shi, TURBOCHARGING SYSTEM DESIGN AND PERFORMANCE ANALYSIS OF A MARINE DIESEL ENGINE, Proceedings of the ASME 2013 Internal Combustion Engine Division Fall Technical Conference ICEF2013 October 13-16, 2013, Dearborn, Michigan, USA ICEF2013-19229
袁源； 崔毅*； 彭海勇； 鄧康耀，未著火循環廢氣改善柴油機冷起動的燃燒，內 燃 機 學 報，Vol.30（2012）No.3，pp227-233
錢躍華,崔毅,鄧康耀*,王振彪,. 不同進氣條件相繼增壓控制策略的仿真研究[J]. 內燃機工程,2011, 32(4):32-38
崔毅，鄧康耀，渦輪增壓柴油機米勒循環分析及優化[J], 鐵道機車車輛，2011, 31(supp1):188-191
Cui, Yi; Gu, Hongzhong; Deng, Kangyao; Yang, Shiyou, Study on Mixed Pulse Converter (MIXPC) Turbocharging System and Its Application in Marine Diesel Engines, Journal of Ship Research, Volume 54, Number 1, March 2010 , pp. 68-77
錢躍華，崔毅，鄧康耀*。大小渦輪相繼增壓系統切換過程建模及數值分析。內燃機學報，2010,28(06):68-73.
崔毅，宋義忠，戴正興，以功率為目標的汽油機凸輪型線優化研究，內燃機工程，第31卷第4期，2010年8月，pp21-24.
彭海勇,崔 毅,鄧康耀,石 磊. 排氣門正時對柴油機冷起動性能的影響，燃燒科學與技術，2009.15（01），82-88
Cui, Yi; Zhu, Yilun; Deng, Kangyao，Study on the Operating Process of an Underwater Diesel Engine，Journal of Ship Research, Volume 52, Number 4, December 2008 , pp. 239-248
Peng HY, Cui Y, Shi L, et al，Effects of exhaust gas recirculation (EGR) on combustion and emissions during cold start of direct injection (DI) diesel engine ，ENERGY Volume: 33 Issue: 3 2008, Pages: 471-479
Peng HY, Cui Y, Deng KY, et al，Combustion and emissions of a direct-injection diesel engine during cold start under different exhaust valve closing timing conditions， PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING Volume: 222 Issue: D1 2008, Pages: 119-129
PENG Haiyong, CUI Yi, SHI Lei. Improve Combustion during Cold Start of DI Diesel Engine by EGR under Normal Ambient Temperature. SAE2008-01-1084，SAE 2008 World Congress, April, 2008, Detroit, USA
Shi, Lei; Cui, Yi; Deng, Kangyao，Effects of cooled external exhaust gas recirculation on diesel homogeneous charge compression ignition engine，Chinese Journal of Mechanical Engineering (English Edition)，V20，n1,2007,Feb.p21-24
彭海勇,崔毅,石磊,鄧康耀. EGR對直噴式柴油機冷起動過程著火燃燒的影響分析. 內燃機學報, 2007, 25(3):193-201
崔毅，朱義倫，鄧康耀，水下柴油機工作特性研究，內燃機工程，第28卷第3期，2007年6月，pp11-14.
Lei Shi, Yi Cui, Kangyao Deng, Haiyong Peng, Yuanyuan Chen，Study of low emission homogeneous charge compression ignition (HCCI) engine using combined internal and external exhaust gas recirculation (EGR)，Energy， 31 Issue: 14 November 2006，2665–2676
崔毅，石磊，劉宇，鄧康耀，柴油均質壓燃發動機的循環模擬研究，內燃機工程，第27卷第4期，2006年8月，pp13-16.
石磊,崔毅,鄧康耀. 柴油燃料HCCI燃燒的穩定性研究[J].內燃機學報,2005,23(3),pp244-249
Y.Cui, K Deng and J Wu，A modelling and experimental study of transient NOx emissions in turbocharged direct injection diesel engines，Journal of Auto mobile Engineering, Proceedings of the Institution of Mechanical Engineers Part D 2004 Vol 218 No D5,p535-541
Y.Cui, K Deng and J Wu，A DI diesel combustion model for use in the transient condition analysis，Journal of Auto mobile Engineering, Proceedings of the Institution of Mechanical Engineers Part D 2001 Vol 215 No D9,p995-1004

1. Course Name: Finite Element Method
Teaching Target: Undergraduate students
Credit hour: 48
Credit: 3

2 Course Name: Structure and Design of Internal Combustion Engine
Teaching Target：Undergraduate students
Credit hour: 48
Credit: 3

2023.03.10 A fully floating piston pin friction test device, ZL202110407444.7
2022.04.27 PRSM load distribution analysis software, 2022SR1031444
2020.01.20 Software for fretting fatigue simulation of contact surfaces, 2020SR0949065
2020.01.20 Software for fretting wear simulation of contact surfaces, 2020SR0711987
2020.01.20 Real-time Simulation Software for Pressure Wave and Performance of Multi-cylinder Diesel Engine, 2020SR0949058
2019.12.13 Exhaust valve spin mechanism for low speed marine engine 201610674767.1
2018.01.29 Diesel engine auxiliary design software 2018SR071375，
2015.5.20 Performance test method and device for turbocharged diesel engines under the plateau environment ZL2012 1 0310919.1
2013.05.22Anti-interference modular quasi-pulse turbocharging system ZL201110338492.1
2013.02.27 Continuous Variable Valve Timing Control System for Internal Combustion Engines ZL201110361747.6
2011.04.13 Continuously adjustable mechanical hydraulic valve lift device ZL200810207218.9
2010.11.03 Adaptive pulse turbocharging system ZL200810201627.8

Vice Chairman of Design and Intelligent Manufacturing Committee of Chinese Society of Internal Combustion Engines
Member of Foundation Parts Committee of Chinese Society of Internal Combustion Engines
Technical Expert of Shanghai Ship Power Innovation Center Co.
Editorial Board Member: Ship engineering

2022 First Award of Machinery Industry Technology Invention
2011 Ministry second award
2009 National Science and Technology Progress second Award
2008 Shanghai Science and Technology Progress First Award
2008 Second Award of shanghai Jiao Tong University Morning star Young Scholars Award Scheme
2001 Shanghai Jiao Tong University-Shang Feng High Tech Science and Education Second Prize
1999 Youth excellent paper third prize of Shanghai Association for Science and Technology