1999—2002, Harbin Institute of Technology Department of Power Machinery and Engineering, Doctor
1997—1999, Harbin Institute of Technology Department of Power Machinery and Engineering, Master
1987—1991, Harbin Institute of Technology Department of Power Machinery and Engineering, Bachelor

2010-date Professor, Institute of Vibration,Shock&Noise, Shanghai Jiaotong University
2004–2009 Associate Professor, Institute of Vibration,Shock&Noise Shanghai Jiaotong university
2002–2004 Postdoctoral research fellow Shanghai Jiaotong University
1991-1997 R&D Engineer of product Harbin Steam Turbine Co. Ltd

2007–2008 Visiting Scholar, Woodruff School of Mechanical Engineering of Georgia Institute of Technology

Rotordynamics
Fault Diagnosis of Rotating Mahcinery
Mechanical Strength& Reliability
Mechanical Vibration and Noise

2006-2008 National Natural Science Foundation of China"Dynamcial Fracture and Nonlinear Dynamical Behavior Coupling Analysis of Rotor System"
2008-2010 National Natural Science Foundation of China" Multiple Model Estimation (IMM) Based Crack Identification and State prediction Mehtod "
2009-2011 National High-Tech Project"CAD Platform of Dynamical Mechanical System"
2013-2016 National Natural Science Foundation of China" Real time measurement method for the dynamical pressure distribution of journal bearing”
2017-2020 National Natural Science Foundation of China “Study on the characteristics of blade tip vortex flow pattern based on film sensor array"

1. JianPing Jing, Meng Guang, SunYi，Xia SongBo. On the Nonlinear Dynamic Behavior of a Rotor-bearing System. Journal of Sound and Vibration. 2004，274（3-5）：1031-1044
2. JianPing Jing, Meng Guang, SunYi，Xia SongBo. A Continuum Damage Mechanics Model on Creep Rupture Life Assessment of a Steam Turbine Rotor. ASME Journal of Engineering for Gas Turbines and Power. 2006, 128（1）：173-177
3. JianPing Jing,Meng Guang, SunYi，Xia SongBo. On the Oil Whip of a Rotor Bearing System by a Continuum model. Applied Mathematics and Modelling. 2005，29（5）：461-475
4. JianPing Jing, SunYi，Xia SongBo，F(xiàn)eng GuoTai. A Continuum Damage Mechanics Model on Low Cycle Fatigue Life Assessment of Steam Turbine Rotor. ?International Journal of Pressure Vessels and Piping. 2001.78(1): 59-64
5. JianPing Jing,Meng Guang, SunYi，Xia SongBo. An Effective Continuum Damage Mechanics Model for Creep-Fatigue Life Assessment of a Steam Turbine Rotor. International Journal of Pressure Vessels and Piping. 2003,80(6)：389-396
6. Jing, JP; Meng, G . Investigation on the failure of the gear shaft connected to extruder. ENGINEERING FAILURE ANALYSIS, 2008 ,15 (4): 420-429
7. Jing, JP; Gao, F ; Johnson, etl. SIimulation of the Delamination along Solder-Pad Interfaces Using a Cohesive Zone Model. Engineering Failure Analysis. IMECE2008: Proceedings of the International Mechanical Engineering Congress and Exposition.
8. Jing, JP; Gao, F ; Johnson, J; Liang, FZ ; Williams, RL; Ou, JM . SIMULATION OF DYNAMIC FRACTURE ALONG SOLDER-PAD INTERFACES USING A COHESIVE ZONE MODEL. Engineering Failure Analysis. 2009,16 (5) : 1579-1586
9. Jing, JP; Meng, G , A novel method for multi-fault diagnosis of rotor system . MECHANISM AND MACHINE THEORY, 2009, 44 (4): 697-709
10. Ying, GC; Meng, G; Jing, JP. Turbocharger rotor dynamics with foundation excitation. ARCHIVE OF APPLIED MECHANICS, 2009, 79 (4): 287-299
11. Gao, F ; Jing, JP; Johnson, J ; Liang, FZ; Williams, RL; Qu, JM. LOADING DIRECTION VERSUS CRACK PROPAGATION PATH IN A LEAD-FREE SINGLE SOLDER JOINT SAMPLE . IMECE2008: PROCEEDINGS OF THE INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2008, VOL 6: 145-152, 2009
12. Gao, F; Jing, JP ; Liang, FZ ; Williams, RL; Qu, JM. EUROSIME 2009: THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICRO-ELECTRONICS AND MICRO-SYSTEMS: 743-749 2009
13. Jing, JP; Li, JZ ; Liu, XQ; Li, DS; Meng, G . Nonlinear Dynamical Behaviors of a Cracked Turbocharger Rotor System with Base Excitation. INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION, 2009, 10 (5): 563-580
14. Jing JP, Liang LH, Meng G. Electromigration Simulation for Metal Lines. Transactions of the ASME Journal of Electronic Packaging.2010,134(3):100200
15. Jing, JP ;Gao, F; Johnson, J ; Liang, FZ; Williams, RL; Qu, JM. Brittle versus Ductile Failure of a Lead-free Single Solder Joint Specimen under Intermediate Strain-Rate Transactions on the IEEE, (In press)
16. JianPing Jing，SunYi，Xia SongBo, Feng GuoTai. A Study on the Oil Whip of a Nonlinear Rotor-Bearing System. The 2002 ASME International Mechanical Engineering Congress&Expositon. 2002. 11, New Orleans, Louisiana.
17. JianPing Jing, Meng Guang. An Effective Method for Multi-Fault Diagnosis of Rotor System. International conference ASME IDETC 2005, Modeling, Vibration and Control of Rotor Systems. September, 2005, Long Beach, California
18. Cheng M, Meng G, Jing JP. Numerical study of a rotor-bearing-seal system. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 221 (7): 779-788 JUL 2007
19. Cheng M, Meng G, Jing JP. Numerical and experimental study of a rotor-bearing-seal system. MECHANISM AND MACHINE THEORY 42 (8): 1043-1057 AUG 2007
20. Cheng M, Meng G, Jing JP. Non-linear dynamics of a rotor-bearing-seal system. ARCHIVE OF APPLIED MECHANICS 76 (3-4): 215-227 NOV 2006

Mechanical Vibrations, Audience: undergraduate
Rotor dynamics, Audience: graduate

Patent of Invention：A tecnique for blade tip pressure field measurment of compressor Patent Number：ZL 2015 1 0210892.2
Patent of Invention：A method for the dynamical pressure distribution measurement of journal bearing Patent Number：ZL201210150641.6
Software copyright: A real time condition monitoring and fault diagnosis system (RMFD) Registration number :2012SR073851
Software copyright: Software of signal processing and analysis for blade tip pressure field of compressor Registration number :2017SR587373

Executive member, Shanghai Society of Vibration Engineering
Executive member, Rotordynamics committee of Chinese Society of Vibration Engineering
Executive member, Modal analysis and test tecnique committee of Chinese Society of Vibration Engineering

2006 Post doctoral Research Fellow Award of Shanghai Jiaotong University
2005 Science and Technology Award of Hei LongJiang Province
2004 Excellent Graduate of Harbin institute of Technology

[Selected Publications] Transactions of the ASME,2006 [Selected Publications] Applied Mathematical Modelling [Selected Publications] Engineering failure Analysis,2009