2011-2016 Shanghai Jiao Tong University, PhD in Power Engineering and Engineering Thermophysics
2015 University of Oxford, Visiting PhD in Engineering Science
2007-2011 Shandong University, BSc in Mechanical Engineering

2022.01-present Associate Professor in School of Mechanical Engineering, Shanghai Jiao Tong University
2019.02-2021.12 Assistant Professor in School of Mechanical Engineering, Shanghai Jiao Tong University
2018.01-2019.01 Postdoctoral Researcher in Department of Engineering Science, University of Oxford
2016.10-2017.12 Research Engineer in Siemens Corporate Technology

2018.01-2019.01 Department of Engineering Science, University of Oxford, Postdoctoral Researcher
2015.04-2015.10 Department of Engineering Science, University of Oxford, Visiting Scholar

1. Gas turbine heat transfer, cooling and aerodynamics, focusing on:
(1) Aerothermal performance of high-pressure turbine blade tips
(2) Advanced thermo-fluids experimental measurement techniques (Infrared thermography, Magnetic Resonance Velocimetry)
2. Aerodynamic-heating protection of hypersonic vehicle and propulsion systems, focusing on film cooling in super/hypersonic flow
3. Thermal management and flow control, with application of artificial intelligence/machine learning algorithms
4. Interdisciplinary research between clinical medicine and thermo-fluids, focusing on fluid dynamics in human blood vessels


PhD and master studentships are available for contact!
Looking for highly-motivated students interested in thermo-fluids research!

2026-2029 Natural Science Foundation of China, Measurement and Scaling of Adiabatic Effectiveness in Blade Cooling of Transonic Turbines Based on Shock Tunnel Testing, PI
2025-2028 Natural Science Foundation of Shanghai, Film Cooling in Air Fin of Hypersonic Vehicles, PI
2024-2027 The National Key Research and Development Program of China, Laminar-to-turbulent Boundary Layer Transition Control Using Micro-structures in Ceramic-Matrix-Composite Materials, Co-PI
2022-2024 Natural Science Foundation of China, Aerothermal Interaction Physics of Shock Wave and Cooling Injection over a High-Pressure Turbine Blade Tip, PI
2021-2024 Natural Science Foundation of Shanghai, Shock Wave-Film Cooling Interaction in Transonic Internal Flows, PI
2021-2023 Shanghai Aerospace Science and Technology Innovation Fund, PI
2020-2023 Youth Science and Technology Talent Program by Shanghai Municipal, Experimental Investigation of Shock Wave on a Transonic High-Pressure Turbine Blade Tip, PI
2019-2022 University Startup Fund, Natural Convection Heat Transfer, Fluid Flow and Its Application in Waste Heat Recovery System, PI

2018-2019 UK EPSRC, Geothermally Sourced Combined Power and Freshwater Generation System, Participating
2014-2016 NSFC, Heat Transfer on Transonic Turbine Blade Tips With High Rotational Speed, Participating
2011-2013 NSFC, Aerothermal Impact of Transonic Flow on High-Pressure Turbine Blade Tips, Participating

2025年
1. Wei Zeng, Yizhi Fang, Haiteng Ma*, 2025, "Use of Multi-Test Strategy to Obtain Heat Transfer Coefficient and Adiabatic Wall Temperature Simultaneously in Shock Tunnel for Transonic Flow over a Flat Plate", Aerospace Science and Technology, Vol. 160, pp. 110057 (12 pages)
2. 蔡宇宙, 曾偉, 賴佑奎, 歐陽華, 馬海騰*.渦輪葉片復合冷卻內外部流動的磁共振測速和湍流模型評估[J].推進技術, 2025 (EI) 網絡首發

2024年
1. Wei Zeng, Haiteng Ma*, 2024, "Physical Mechanism for Extending the Test Time in Gun Tunnels," Aerospace Science and Technology, Vol. 146, pp. 108920 (11 pages)
2. Siming Dai, Haiteng Ma*, Ziran Xu, Kangjun Feng, 2024, “Numerical Study of Discrete Film Cooling Near the Rudder Shaft of a Hypersonic Air Fin Model,” Numerical Heat Transfer, Part A: Applications, Vol. 85, No. 5, pp. 679-701
3. Jianing Li, Zhipeng Zong, Tao Zhou, Jiang Zhang, Haiteng Ma*, 2024, "Hemodynamics in Portal Venous Based on 9.4 T Magnetic Resonance Velocimetry and Numerical Simulations", Journal of Shanghai Jiao Tong University
4. 馬海騰*, 崔家博, 杜磊, 2024, 氣膜冷卻在超/高超聲速飛行器及其動力系統的應用, 航空動力, 3: 65-69
5. Wei Zeng, Siming Dai, Yisu Liu, Haiteng Ma*, 2024, "Assessment of Measurement Techniques for Adiabatic Cooling Effectiveness in Transonic Flow over a Flat Plate", ASME Turbo Expo Conference, London, UK, Paper No. GT2024-127493
6. Yizhi Fang, Wei Zeng, Haiteng Ma*, 2024, "Numerical Demonstration for a Novel Design of High-temperature Turbine Facility Enabled by Shock Tube", ASME Turbo Expo Conference, London, UK, Paper No. GT2024-127546

2023年
1. Haiteng Ma, Yisu Liu, Youkui Lai, Hua Ouyang*, Jia Ning, Xianwang Jiang, Qin Xu, 2023, "Magnetic Resonance Velocimetry of A Turbine Blade With Engine Representative Internal and Film Cooling Structures," ASME Journal of Turbomachinery, Vol. 145, No. 1, pp. 011004 (10 pages)
2. 賴佑奎,馬海騰,劉一粟,歐陽華*.2023, 基于磁共振測速的復合冷卻渦輪葉片流動分析.航空學報, 44(14): 627920
3. 戴思明, 許自然, 竇怡彬, 馬海騰*, 趙如意, 2023, "超高速流動中氣膜冷卻技術的研究綜述," 空天防御, 6(4), pp. 24-29.
4. 劉一粟, 曾偉, 戴思明, 李家寧, 馬海騰*. 2023, 跨音速槽道流中絕熱氣膜冷卻效率的求解方法.動力工程學報, 43(12), pp. 1577-1584
5. Wei Zeng, Yisu Liu, Siming Dai, Haiteng Ma*, 2023, "Transient Thermal Measurement of Adiabatic Cooling Effectiveness in Transonic Channel Flow", Global Power and Propulsion Society, Hong Kong, Paper No. HTFC-180
6. Wei Zeng, Jinpeng Zhao, Yizhi Fang, Haiteng Ma*, 2023, “Parametric Study on Extending the Effective Test Time in Gun Tunnels”. The 34th International Symposium on Shock Waves, Dague, South Korea

2022年
1. Haiteng Ma*, Wei Zeng, Siming Dai, Hongmei Jiang, 2022, "Sensitivity of Adiabatic Cooling Effectiveness to Mainstream and Coolant Temperatures in Transonic Flow Over an Idealized Blade Tip Model", ASME Journal of Turbomachinery, Vol. 144, No. 11, pp. 111013 (12 pages)
2. Haiteng Ma*, Wei Zeng, Hongmei Jiang, Jun Hong, 2022, "Impact of Cooling Injection on Shock Wave over a Flat Tip in High Pressure Turbine", ASME Journal of Turbomachinery, Vol. 144, No. 1, pp. 011012 (13 pages)
3. Haiteng Ma*, Li He, Guopeng Yu, Zhibin Yu, 2022, “Natural Convection Heat Transfer and Fluid Flow in a Thermal Chimney With Multiple Horizontally-aligned Cylinders”, International Journal of Heat and Mass Transfer, Vol. 183, Part C, pp. 122239 (13 pages)
4. Haiteng Ma*, Wei Zeng, Siming Dai, Hongmei Jiang, 2022, "Sensitivity of Adiabatic Cooling Effectiveness to Mainstream and Coolant Temperatures in Transonic Flow Over an Idealized Blade Tip Model," ASME Turbo Expo Conference, Rotterdam, The Netherlands, Paper No. GT2022-82778
5. Haiteng Ma, Yisu Liu, Youkui Lai, Hua Ouyang*, Jia Ning, Xianwang Jiang, Qin Xu, 2022, "Magnetic Resonance Velocimetry of A Turbine Blade With Engine Representative Internal and Film Cooling Structures," ASME Turbo Expo Conference, Rotterdam, The Netherlands, Paper No. GT2022-82849

2021年
1. Haiteng Ma*, and Li He, 2021, “Large Eddy Simulation of Natural Convection Heat Transfer and Fluid Flow around a Horizontal Cylinder,” International Journal of Thermal Sciences, Vol. 162, pp. 106789 (15 pages).

2020年
1. Shaopeng Lu*, Haiteng Ma, Qiang Zhang, Jinfang Teng, 2020, "Cutback Squealer Tip Trailing Edge Cooling Performance," International Journal of Heat and Mass Transfer, Vol. 154, pp. 119632 (15 pages).

2019年
1. 王維杰,盧少鵬,馬海騰,張強,滕金芳,余文勝.2019, 高壓渦輪尾切凹槽葉尖冷卻換熱特性[J].航空動力學報, 34(10):2131-2139.
2. Haiteng Ma*, Li He, Sham Rane, 2019, “Heat Transfer-Fluid Flow Interaction in Natural Convection around Heated Cylinder and Its Thermal Chimney Effect,” International Conference on Innovative Applied Energy, Oxford, UK
3. Sham Rane*, Li He, Haiteng Ma, 2019, "CFD modelling and analysis of Two-Phase Geothermal Energy Turbine in Project Combi-Gen," International Conference on Innovative Applied Energy, Oxford, UK
4. Neil Burnside, Sham Rane, Guopeng Yu, Haiteng Ma, Nelly Montcoudiol, Weihong Li, Elias Teklemariam, Adrian Boyce, Li He, Zhibin Yu, 2019, "Geothermally Sourced Combined Power and Freshwater Generation for Eastern Africa," European Geothermal Congress, Den Haag, Netherlands

2018年及以前
1. Haiteng Ma, Qiang Zhang*, Li He, Zhaoguang Wang, and Lipo Wang, 2017, “Cooling Injection Effect on a Transonic Squealer Tip - Part 1: Experimental Heat Transfer Results and CFD Validation,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 139, No. 5, pp. 052506 (9 pages).
2. Haiteng Ma, Qiang Zhang*, Li He, Zhaoguang Wang, and Lipo Wang, 2017, “Cooling Injection Effect on a Transonic Squealer Tip - Part 2: Analysis of Aerothermal Interaction Physics,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 139, No. 5, pp. 052507 (9 pages).
3. Haiteng Ma, Zhaoguang Wang, Lipo Wang, Qiang Zhang*, Zhong Yang, and Yi Bao, 2016, "Ramp Heating in High-Speed Transient Thermal Measurement with Reduced Uncertainty," AIAA Journal of Propulsion and Power, Vol. 32, No. 5, pp. 1190-1198.
4. Fangpan Zhong, Chao Zhou*, Haiteng Ma, and Qiang Zhang, 2017, “Heat Transfer on Winglet Tips in a Transonic Turbine Cascade,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 139, No. 1, pp. 012605 (11 pages).
5. Haiteng Ma, Qiang Zhang*, Li He, Zhaoguang Wang, and Lipo Wang, 2016, “Cooling Injection Effect on a Transonic Squealer Tip - Part 1: Experimental Heat Transfer Results and CFD Validation,” ASME Turbo Expo Conference, Seoul, South Korea, Paper No. GT2016-57579.
6. Haiteng Ma, Qiang Zhang*, Li He, Zhaoguang Wang, and Lipo Wang, 2016, “Cooling Injection Effect on a Transonic Squealer Tip - Part 2: Analysis of Aerothermal Interaction Physics,” ASME Turbo Expo Best Paper Award, Seoul, South Korea, Paper No. GT2016-57587.
7. Haiteng Ma, Zhaoguang Wang, Lipo Wang, Qiang Zhang*, Zhong Yang, and Yi Bao, 2015, “Ramp Heating in High-Speed Transient Thermal Measurement with Reduced Uncertainty,” ASME Turbo Expo Conference, Montreal, Canada, Paper No. GT2015-43012.
8. Diwei Zhu, Shaopeng Lu, Haiteng Ma, Qiang Zhang, Jinfang Teng, 2017, “Rotating Effect on Transonic Squealer Tip Cooling Performance,” ASME Turbo Expo Conference, Charlotte, US, Paper No. GT2017-64293.
9. Fangpan Zhong, Chao Zhou*, Haiteng Ma, and Qiang Zhang, 2016, “Heat Transfer on Winglet Tips in a Transonic Turbine Cascade,” ASME Turbo Expo Conferenc, Seoul, South Korea, Paper No. GT2016-56804
10.Xiang Zhang, Zhong Yang, Shuqing Tian, and Haiteng Ma, 2015, “Numerical Study of the Film Cooling With Discrete Hole Arrangement on a Cutback Squealer Turbine Blade Tip,” ASME Turbo Expo Conference, Montreal, Canada, Paper No. GT2015-43877

Heat Transfer (ME204), Undergraduate course
Compressible Aerodynamics (PE6125), Graduate course

《推進技術》青年編委

Chair of Facilities and Instrumentation Session, International Symposium on Shock Waves, 2023, 2025
Chair of Heat Transfer Session, ASME Turbo Expo, 2019
Chair of Heat Transfer Session, Global Power and Propulsion Forum, 2017, 2022, 2023, 2025
分會主席（渦輪冷卻），中國工程熱物理年會熱機氣動力學分會，2020
Reviewer for:
ASME Journal fo Turbomachinery, International Journal of Thermal Sciences, International Journal of Heat and Mass Transfer, Physics of Fluids, ASME Journal of Thermal Science and Engineering Applications, Journal of Power and Energy, Journal of Aerospace Engineering, Aeronautical Journal, ASME Turbo Expo, etc.

2017 ASME Turbo Expo Best Paper Award
2016 ASME International Gas Turbine Institute (IGTI) Student Scholarship

Ma et al. 2017. JEGTP. Cooling injection effect on transonic squealer. Part 1

Ma et al. 2017. JEGTP. Cooling injection effect on transonic squealer.Part 2 (ASME Turbo Expo Best Paper)

Ma & He. 2021. IJTS. Large eddy simulation natural convection around a horizontal cylinder