1992 - 1995, School of Mechanical Engineering, Shanghai Jiao Tong University, Doctor
1990 - 1992, School of Material Engineering, Shanghai Jiao Tong University, Master
1984 - 1988, School of Mechanical Engineering, Huazhong University of Science and Technology, Bachelor

1998-2002 Research Fellow, Manufacturing Information Technology, Singapore Institute of Manufacturing Technology
2002-2005 Research Scientist, Product Design and Development Group, Singapore Institute of Manufacturing Technology
2005- Professor, Institute of Smart Manufacturing System，Department of Industrial Engineering, School of Mechanical Engineering, Shanghai Jiao Tong University

1 June 2007 to 30 August 2007，Visiting Faculty Fellow, Massachusetts Institute of Technology, USA

1. Industrial Artificial Intelligence, Intelligent Product System, Intelligent Production System, Intelligent Service System;
2. Industrial AIoT (Artificial Intelligence + Internet of Things), Smart Manufacturing System, Industry 4.0, Industrial Internet, Industrial Big Data;
3. Smart Product Innovation Ecosystem, Product Ecosystem Design, Personalized Product Development, Smart Product Design, Mass Personalization;
4. Product Service System, Smart Product Service System, Smart Product Service Ecosystem, Service-Oriented Manufacturing, Producer Service Development, Value Symbiosis for Smart Product Service System;
5. Lean Enterprise Management, Lean Design and Product Development, Lean Logistics and Supply Chain, Lean Engineering and Manufacturing, Lean Six Sigma.

1998-2002 PDES/STEP based Integrated System of Project Management, CAD/CAPP/CAM, and Production Scheduling, National Science and Technology Board of Singapore, Project Team Leader.
2002-2003 Process-Centric Enterprise Information Technology Development and Application, National Science and Technology Board of Singapore, Project Leader.
2002-2004 Research on Methodology and Technology for Intelligent Process Planning in Virtual Enterprise, Agency for Science, Technology and Research, Singapore, Project Leader.
2003-2005 Theory and Technology for Product Lifecycle Management, Agency for Science, Technology and Research, Singapore, Project Leader.
2005-2007 Architecture and Technology for Product Lifecycle Management, Shanghai Science and Technology Commission, (Shanghai Pu Jiang Program）(05PJ14076), Project Leader.
2006-2007 Technology for Product Lifecycle Collaboration, Shanghai Science and Technology Commission (International Collaboration Program) (05SN07116), Project Leader.
2006-2009 Demonstrated Application of Collaborative Manufacturing Grid, National Natural Science Foundation (90612017), Project Member.
2007-2010 Architecture Design of Enterprise Information System for Research and Development Institute, XXX Institute, China Shipbuilding Industry Corporation, Project Leader.
2007-2009 Research and Application of Enterprise Master Data Management Technology, Jiangsu XX High Technology Corporation, Project Leader.
2007-2010 Research and Application of Inter-Enterprise Collaborative Platform for Aerospace Industry, National 863 High Technology Plan (2007AA04Z189E), Sub-Project Leader.
2008-2008 Real Case-based PLM Application Demonstration, XXX（China）Institute, Project Leader.
2009-2009 Architecture Design of Enterprise University for Shanghai Power Supply, Shanghai XX Management Consulting Cop. Ltd, Project Leader.
2010-2012 Research on Modeling and Optimization of Modern City Fulfillment Network, XXX（China）Transportation Cop. Ltd., Project Leader.
2010.1-2010.12 Product research and development design of the two integration of comprehensive research, Shanghai Economic and Information Commission, Project Leader.
2010.3-2011.12 Construction of a single data source for civil aircraft products, China Aviation Commercial Aircraft Co., Ltd., Project Technical Leader.
2010.10-2011.3 XX Modern Production Development Blueprint, XX Co., Ltd., Project Leader.
2010.9-2011.6 Process design of project management for New Product Development (NPD), China XX (Shenyang) Machinery Co., Ltd., Project Leader.
2010.10-2012.10 Digital Service Platform for Civil Aircraft, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2010.7-2011.7 FMEA method in the nuclear power project in the development of thermal valve application research, Shanghai XX Equipment Co., Ltd., Project Leader.
2010.9-2013.6 lean research and development design process re-engineering and information integration for "Three-network fusion" equipment product, Shanghai Economic and Information Technology Commission, , Project Cooperation Leader.
2011.1-2011.12 Digital Factory System Research and Typical Case Analysis, Shanghai Economic and Information Technology Commission, Project Leader.
2011.6-2011.12 Research on information systems in the multi-customer environment, Shanghai XX Automotive Technology Center Co., Ltd., Project Leader.
2011.3-2011.12 XX filling line design services and manufacturing, XX Co., Ltd., Project Leader.
2011.6-2011.12 XX Food (Group) Co., Ltd. Enterprise Information Planning, Shanghai XX Investment Consulting Co., Ltd., Project Leader.
2011.9-2013.9 Research and Application of the full-life maintenance service model and key technologies of civil aircraft, Shanghai Science and Technology Commission, Project Cooperation Leader.
2012.10-2014.09 Information Technology supports the research and application demonstration of civil aircraft service model, Shanghai Science and Technology Commission, Project Cooperation Leader.
2012.09-2015.03 MBD-based large commercial aircraft collaborative assembly process and fixture design technology research and system application, Shanghai Science and Technology Commission, Project Cooperation Leader.
2012.1-2014.12 Commercial aviation engine co-development information platform, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2012.10-2014.9 Large-scale marine engineering equipment collaborative research and development and manufacturing information system, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2012.1-2015.6 Marine Engineering Equipment Research and Development Design Innovation Service Platform, Shanghai Development and Reform Commission, Project Cooperation Leader.
2012.1-2015.12 Offshore drilling platform equipment manufacturing welding intelligent workshop, National Development and Reform Commission / State Ministry of Industry and Information Technology / Ministry of Finance, intelligent manufacturing special, information technology sub-project Cooperation Leader.
2013.1-2016.12 Elevator Maintenance Innovation Service Platform, Shanghai Development and Reform Commission, Project Cooperation Leader.
2013.1-2016.12 New Energy Equipment Research and Development Design Service Innovation Platform, Shanghai Development and Reform Commission, Project Cooperation Leader.
2013.10-2015.09 Internet of Things-based engineering machinery product intelligent service cloud platform, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2013.10-2015.09 Intelligent manufacturing system and integrated cloud platform for aerospace product, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2014.6-2016.12 Large Equipment Group Supply Chain Synergy O2O Platform Construction, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2014.6-2016.12 Research and Development Innovation, Industrial, Scientific and Technology Application of Marine Engineering Equipment Paving System, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2015.6-2017.12 Intelligent Manufacturing System for D-Series Air Conditioning Compressor, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2015.5-2017.12 Intelligent Manufacturing Comprehensive Standardization Test Verification for Marine Engineering Equipment, State Ministry of Industry and Information Technology/Ministry of Finance, Intelligent Manufacturing Special, Project Cooperation Leader.
2015.5-2017.12 Shanghai Green Paper on the Development of Productive Services, Shanghai Economic and Information Technology Commission, Project Leader.
2015.08-2018.12 Large data analysis system for civil aircraft safety monitoring, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2016.04-2018.12 Large commercial aircraft fault diagnosis and health management intelligent service platform, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2016.1-2018.12 New business model of intelligent manufacturing for mass customization of air conditioning compressor, the State Ministry of Industry and Information Technology / Ministry of Finance, intelligent manufacturing special, Project Cooperation Leader.
2016.4-2018.12 XXXX Technology Research and Application of Big Data Analysis for Smart Industry, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2016.1-2018.12 Technology Development and Application of Industry Design Innovation Chain with Multi-Method Fusion for Offshore Core Equipment, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2016.1-2018.12 General Contract of Qingdao automation terminal loading and unloading system, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2016.1-2018.12 Green supply chain standard system construction and demonstration application for large-scale complete sets of equipment of intelligent port, The Ministry of Industry and Information Technology / Ministry of Finance, green manufacturing special, Project Cooperation Leader.
2017.1-2019.6 Demonstration of quality control technology innovation and application in the design process of large civil aircraft, Shanghai Economic and Information Technology Commission, Project Cooperation Member.
2017.1-2019.6 Elevator Product Service Ecosystem Development Based on the Industrial Internet, Shanghai Economic and Information Technology Commission, Industrial Internet Special, Project Cooperation Leader.
2017.1-2019.6 XX Business Model Innovation of Large-scale Personalized Application of Commercial Vehicles, Shanghai Economic and Information Technology Commission, Industrial Internet Special, Project Cooperation Leader.
2017.1-2019.6 XX Industrial Big Data Platform, Shanghai Economic and Information Technology Commission, Industrial Internet Special, Project Cooperation Leader.
2017.1-2019.12 New model application of intelligent manufacturing for Large-scale marine engineering lifting equipment, State Ministry of Industry and Information Technology/Ministry of Finance, Smart Manufacturing Special, Project Cooperation Leader.
2017.1-2019.12 Green Design Platform Construction for High-tech Ship Power System, State Ministry of Industry and Information Technology/Ministry of Finance, Green Manufacturing Special, Project Cooperation Leader.
2017.2-2019.1 Solar Off-Grid Power Supply Operation Management Service Platform, Shanghai Development and Reform Commission, Project Cooperation Leader.
2017.1-2019.12 New model application of intelligent manufacturing for large-scale marine engineering lifting equipment, the Ministry of Industry and Information Technology / Ministry of Finance, intelligent manufacturing special, Project Cooperation Leader.
2017.1-2019.12 Ship power system integration solution based on the industrial Internet, Shanghai Economic and Information Technology Commission, industrial Internet special, Project Cooperation Leader.
2018.6-2021.5 Research on the theoretical methods and technical applications of the self-developed system of gas turbine, the Ministry of Industry and Information Technology/Ministry of Finance, the two-machine special, Project Cooperation Leader.
2018.1-2020.12 lifting equipment remote monitoring system solution, Shanghai Economic and Information Commission, service-oriented manufacturing special, Project Cooperation Leader.
2018.1-2018.12 Technology trend and application prospects research for Shanghai block-chain, Shanghai Decision-Making Advisory Committee, Project Leader.
2018.1-2020.12 Network collaboration and application based on enterprise interconnection of energy-saving and environmental protection compressor, Shanghai Economic and Information Technology Commission, Industrial Internet Special, Project Cooperation Leader.
2018.1-2020.12 Research and Test Verification of Long-range Fault Model Identification and Predictive Maintenance Standards For Port Container Cranes, State Ministry of Industry and Information Technology/Ministry of Finance, Intelligent Manufacturing Special, Project Cooperation Leader.
2018.1-20 18.12 Key Model and Promotion Program Research for Shanghai Service-oriented Manufacturing Development, Shanghai Economic and Information Technology Commission, Project Cooperation Leader.
2018.1-2021.12 Big Data Decision-Making Service Platform for Construction Industry Based on Integrated Management, Shanghai Development and Reform Commission, Project Cooperation Leader.

International Journal Papers:
1) Zhang, Xianyu, Xinguo Ming, Zhiwen Liu, Yuanju Qu, and Dao Yin. 2019. "An overall framework and subsystems for smart manufacturing integrated system (SMIS) from multi-layers based on multi-perspectives." The International Journal of Advanced Manufacturing Technology. doi: 10.1007/s00170-019-03593-6.
2) Zhang, Xianyu, Xinguo Ming, and Dao Yin. 2019. "Reference architecture of common service platform for Industrial Big Data (I-BD) based on multi-party co-construction." The International Journal of Advanced Manufacturing Technology. doi: 10.1007/s00170-019-04374-x.
3) Yuanju Qu*, Xinguo Ming, Siqi Qiu, Maokuan, Zheng, Zengtao Hou “An Integrative Framework for Online Prognostic and Health Management using Internet of Things and Convolutional Neural Network”, Sensors
4) S. Qiu, Henry X. G. Ming*. Reliability evaluation of multi-state series-parallel systems with common bus performance sharing considering transmission loss. Reliability Engineering and System Safety, 2019, 189: 406-415.
5) S. Qiu, Henry X. G. Ming*. Reliability analysis of multi-state series systems with performance sharing mechanism under epistemic uncertainty. Quality and Reliability Engineering International, 2019, 35: 1998-2015.
6) X. Li, S. Qiu*, Henry X. G. Ming. An integrated module-based reasoning and axiomatic design approach for new product design under incomplete information environment. Computers & Industrial Engineering, 2019, 127: 63-73.
7) Zhang, Xianyu, Xinguo Ming, Zhiwen Liu, and Yuanju Qu. 2019. “Reference subsystems for Smart Manufacturing Collaborative System (SMCS) from multi-processes, multi-intersections, and multi-operators.” Enterprise Information Systems.
8) Zhang, Xianyu, Xinguo Ming, Zhiwen Liu, Yuanju Qu, and Dao Yin. 2019. "State-of-the-art review of customer to business (C2B) model." Computers & Industrial Engineering 132:207-22. doi: https://doi.org/10.1016/j.cie.2019.04.039.
9) Zhang, Xianyu, Xinguo Ming, Zhiwen Liu, Yuanju Qu, and Dao Yin. 2019. "A framework and implementation of Customer Platform-connection manufactory to service (CPMS) model in product service system." Journal of Cleaner Production 230:798-819. doi: https://doi.org/10.1016/j.jclepro.2019.04.382.
10) Zhang, X. Y., X. G. Ming, Z. W. Liu, M. K. Zheng, and Y. J. Qu. 2019. "A new customization model for enterprises based on improved framework of customer to business: A case study in automobile industry." Advances in Mechanical Engineering 11 (3). doi: 10.1177/1687814019833882.
11) Chen, Z., Ming, X., Zhang, X., Yin, D., Sun, Z. (2019). A rough-fuzzy DEMATEL-ANP method for evaluating sustainable value requirement of product service system. Journal of Cleaner Production, 228, 485-508.
12) Chen, Z., Lu, M., Ming, X., Zhang, X., Zhou, T., (2020). Explore and evaluate innovative value propositions for smart product service system: A novel graphics-based rough-fuzzy DEMATEL method. Journal of Cleaner Production 243, 118672.
13) Zhiwen Liu & Xinguo Ming (2019): A framework with revised rough-DEMATEL to capture and evaluate requirements for smart industrial product-service system of systems, International Journal of Production Research
14) Yuanju Qu, Ming Xinguo, Siqi Qiu, Zhiwen Liu, Xianyu Zhang and Zengtao Hou. 2019. "Integrating Fuzzy Kano Model and Fuzzy AHP to Evaluate Requirements of Smart Manufacturing Systems." Concurrent Engineering: Research and Applications. Volume: 27 issue: 3, page(s): 201-212Article first published online: September 01, 2019;Issue published: September 01, 2019; DOI：10.1177/1063293X19845137
15) Xianyu Zhang, Xinguo Ming, Zhiwen Liu, Dao Yin, Zhihua Chen, Yuan Chang.A reference framework and overall planning of industrial artificial intelligence (I-AI) for new application scenarios. International Journal of Advanced Manufacturing Technology, November 2018, DOI: 10.1007/s00170-018-3106-3
16) Xianyu Zhang, Xinguo Ming, Zhiwen Liu, Dao Yin, Zhihua Chen.A reference system of smart manufacturing talent education (SMTE) in China. International Journal of Advanced Manufacturing Technology, October 2018, DOI: 10.1007/s00170-018-2856-2
17) Zheng M K, Ming X G*, Zhang X Y, et al. MapReduce Based Parallel Bayesian Network for Manufacturing Quality Control[J]. Chinese Journal of Mechanical Engineering, 2017, 30(5): 1216-1226.
18) He L, Ming X G, Li M, et al. Understanding customer requirements through quantitative analysis of an improved fuzzy Kano’s model[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2017, 231(4): 699-712.
19) Song W, Ming X G, Liu H C. Identifying critical risk factors of sustainable supply chain management: A rough strength-relation analysis method[J]. Journal of Cleaner Production, 2017, 143: 100-115.
20) He L, Song W, Wu Z, Xu Z, Zheng M, Ming X G. Quantification and Integration of an Improved Kano Model into QFD based on Multi-population Adaptive Genetic Algorithm[J]. Computers & Industrial Engineering, 2017.
21) Zheng M, Ming X G, Li G. Dynamic Optimization for IPS2 Resource Allocation Based on Improved Fuzzy Multiple Linear Regression[J]. Mathematical Problems in Engineering, 2017: 1-10.
22) Li X, Ming X G, Song W, et al. A fuzzy technique for order preference by similarity to an ideal solution–based quality function deployment for prioritizing technical attributes of new products[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016, 230(12): 2249-2263.
23) Li M, Ming X G, He L, et al. A TRIZ-based trimming method for patent design around[J]. Computer-Aided Design, 2015, 62: 20-30.
24) Li M, Ming X G, Zheng M, et al. An integrated TRIZ approach for technological process and product innovation[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015: 0954405415583885.
25) Song W, Ming X G, Han Y, et al. An integrative framework for innovation management of product–service system[J]. International Journal of Production Research, 2015, 53(8): 2252-2268.
26) He L, Ming X G, Ni Y, et al. Ontology-based information integration and sharing for collaborative part and tooling development[J]. Concurrent Engineering, 2015, 23(3): 199-212.
27) He L, Ming X G, Li M, et al. Understanding customer requirements through quantitative analysis of an improved fuzzy Kano’s model[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015: 0954405415598894.
28) Zheng M, Ming X G, Li M, et al. A framework for Industrial Product–Service Systems risk management[J]. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 2015, 229(6): 501-516.
29) Li X, Ni Y, Ming X G, et al. Module-based similarity measurement for commercial aircraft tooling design[J]. International Journal of Production Research, 2015, 53(17): 5382-5397.
30) Xu Z, Ming X G, Zheng M, et al. Cross-trained workers scheduling for field service using improved NSGA-II[J]. International Journal of Production Research, 2015, 53(4): 1255-1272.
31) Xu Z, Elomri A, Pokharel S, Ming X G. Product-service supplier pre-evaluation with modified fuzzy ANP reducing decision information distortion[J]. International Journal of Computer Integrated Manufacturing, 2015: 1-17.
32) Xu Z, Ming X G, Wu T, et al. Product Service Supply-Chain Design[M]//Handbook of Manufacturing Engineering and Technology. Springer London, 2015: 3219-3237.
33) Song W, Ming X G, Wu Z, et al. A rough TOPSIS approach for failure mode and effects analysis in uncertain environments[J]. Quality and Reliability Engineering International, 2014, 30(4): 473-486.
34) Song W, Ming X G, Han Y. Prioritising technical attributes in QFD under vague environment: a rough-grey relational analysis approach[J]. International journal of production research, 2014, 52(18): 5528-5545.
35) Xu Z, Ming X G, Song W, et al. Towards a new framework: Understanding and managing the supply chain for product-service systems[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014, 228(12): 1642-1652.
36) Xu Z, Ming X G, Song W, et al. Collaborative project management: a systemic approach to heavy equipment manufacturing project management[J]. Systemic Practice and Action Research, 2014, 27(2): 141-164.
37) He L, Ni Y, Ming X G, et al. Integration of bill of materials with unified bill of materials model for commercial aircraft design to manufacturing[J]. Concurrent Engineering, 2014, 22(3): 206-217.
38) Wang P P, Ming X G, Wu Z Y, et al. Research on industrial product–service configuration driven by value demands based on ontology modeling[J]. Computers in Industry, 2014, 65(2): 247-257.
39) Wu Z Y, Ming X G, He L N, et al. Knowledge integration and sharing for complex product development[J]. International Journal of Production Research, 2014, 52(21): 6296-6313.
40) Wu Z, Ming X G, Song W, et al. Nuclear Product Design Knowledge System Based on FMEA Method in New Product Development[J]. Arabian Journal for Science & Engineering (Springer Science & Business Media BV), 2014, 39(3).
41) Song W, Ming X G, Xu Z. Risk evaluation of customer integration in new product development under uncertainty[J]. Computers & Industrial Engineering, 2013, 65(3): 402-412.
42) Song W, Ming X G, Wu Z, et al. Failure modes and effects analysis using integrated weight-based fuzzy TOPSIS[J]. International Journal of Computer Integrated Manufacturing, 2013, 26(12): 1172-1186.
43) Song W, Ming X G, Wang P. Collaborative product innovation network: Status review, framework, and technology solutions[J]. Concurrent Engineering, 2013, 21(1): 55-64.
44) Song W, Ming X G, Han Y, et al. A rough set approach for evaluating vague customer requirement of industrial product-service system[J]. International Journal of Production Research, 2013, 51(22): 6681-6701.
45) Song W, Ming X G, Xu Z. Integrating Kano model and grey–Markov chain to predict customer requirement states[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013, 227(8): 1232-1244.
46) Li M, Ming X G, Zheng M, et al. A framework of product innovative design process based on TRIZ and Patent Circumvention[J]. Journal of Engineering Design, 2013, 24(12): 830-848.
47) Wang L, Ming X G, Kong F B. Optimizing Design Alternation through Balancing Customer Satisfaction and Risk[C]//Advanced Materials Research. Trans Tech Publications, 2013, 662: 648-652.
48) Xu Z, Ming X G, Zhou J, et al. Management optimisation based on dynamic SKU for RFID-enabled warehouse management in the steel supply chain[J]. International Journal of Production Research, 2013, 51(10): 2981-2996.
49) He L N, Ming X G, Kong F B, et al. Research on airplane BOM management based on single source of product data[C]//Applied Mechanics and Materials. Trans Tech Publications, 2012, 232: 184-188.
50) Wang X, Kong F, Ming X G, et al. A Buffered-State Front Line Approach in Multi-tier Supplier Collaborative Project Controlling[J]. Physics Procedia, 2012, 24: 580-586.
51) Kong F B, Ming X G, Wang L, et al. Framework of a representation model for modular product development[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2012, 226(5): 941-949.
52) Wu Z Y, Ming X G, Song W Y, et al. The Design and Realization of E-Learning System for Organizational Learning[C]//Advanced Materials Research. Trans Tech Publications, 2012, 422: 482-485.
53) Song W Y, Ming X G, Wu Z Y, et al. A Risk Management Framework for Users’ Integratation in Product Innovation[C]//Advanced Materials Research. Trans Tech Publications, 2012, 415: 106-111.
54) Xu Z T, Ming X G, Wu Z Y, et al. The Evaluation of Multi-Supplier Quality Competitiveness Based on TFN-AHP Method[C]//Advanced Materials Research. Trans Tech Publications, 2012, 421: 595-600.
55) Kong F, Ming X G, Wang L, et al. An integrated modularity approach for green product development[J]. International Journal of Environmental Technology and Management, 2011, 14(5-6): 397-416.
56) Wang P, Ming X G, Li D, et al. Achieving sustainability through product-service life cycle management[J]. International Journal of Environmental Technology and Management, 2011, 14(5-6): 516-530.
57) Wang P P, Ming X G, Zhang D, et al. Inventory Control Policy of Service Parts under the Background of Service-Embedded Manufacturing[C]//Advanced Materials Research. Trans Tech Publications, 2011, 201: 2509-2512.
58) Wang P P, Ming X G, Li D, et al. Status review and research strategies on product-service systems[J]. International Journal of Production Research, 2011, 49(22): 6863-6883.
59) Wang P P, Ming X G, Li D, et al. Modular development of product service systems[J]. Concurrent engineering, 2011: 1063293X11403508.
60) Wu Z Y, Ming X G, Song W Y, et al. Research on Large Steam Butterfly Valve for Steam Turbine DFMEA Tool System Based on Knowledge Management[C]//Advanced Materials Research. Trans Tech Publications, 2011, 291: 2961-2964.
61) Wang L, Ming X G, Kong F B, et al. Focus on implementation: a framework for lean product development[J]. Journal of Manufacturing Technology Management, 2011, 23(1): 4-24.
62) Wang L, Ming X G, You J, et al. An Approach for Lean Product Innovation Management[C]//Applied Mechanics and Materials. Trans Tech Publications, 2011, 55: 2075-2079.
63) Song W Y, Ming X G, Wu Z Y, et al. A Bayesian Network Based Approach to Defect Prediction in New Product Development[C]//Advanced Materials Research. Trans Tech Publications, 2011, 328: 241-245.
64) Zhao C L, Ming X G, Wang X H. Supplier Involved Collaborative Project Management in Complex Product Development[C]//Advanced Materials Research. Trans Tech Publications, 2011, 255: 3022-3026.
65) Kong F B, Ming X G, Wang L, et al. Development of Product Options for Modular Product Development[C]//Applied Mechanics and Materials. Trans Tech Publications, 2011, 55: 2147-2152.
66) Wang L, Ming X G, You J, et al. A new design methodology for metadata of master data management system[J]. International Journal of Innovative Computing, Information and Control. v6 i7, 2010: 3219-3228.
67) Wang X H, Fu L W, Ming X G, et al. Supplier-involved collaborative product development in PLM[J]. International Journal of Computer Applications in Technology, 2010, 37(3-4): 244-256.
68) Lin Y, Ming X G. Multi-level contextual product development knowledge management in PLM[J]. International Journal of Computer Applications in Technology, 2010, 37(3-4): 279-286.
69) Zhang Q, Ming X G, Lu C. Reliability evaluation of conceptual colour design based on rough sets[J]. International Journal of Computer Applications in Technology, 2010, 37(3-4): 204-209.
70) Zhang Q, Kang W, Zhao C, Ming X G. Aesthetic coloring for complex layout using genetic algorithm[C]//Intelligent Systems, 2009. GCIS'09. WRI Global Congress on. IEEE, 2009, 3: 406-410.
71) Kong F B, Ming X G, Wang L, et al. On modular products development[J]. Concurrent Engineering, 2009, 17(4): 291-300.
72) Wang X H, Ming X G, Kong F B, et al. Collaborative project management with supplier involvement[J]. Concurrent Engineering, 2008, 16(4): 253-261.
73) Ming X G, Yan J Q, Wang X H, et al. Collaborative manufacturing process planning for distributed integration in tooling industry[J]. International Journal of Manufacturing Technology and Management, 2008, 14(1-2): 17-34.
74) Ming X G, Yan J Q, Wang X H, et al. Collaborative process planning and manufacturing in product lifecycle management[J]. Computers in Industry, 2008, 59(2): 154-166.
75) Yan J Q, Ming X G, Lu W F, et al. Special issue on: New research advances in product lifecycle management[J]. Concurrent Engineering, 2008, 16(4): 241-241.
76) Ming X G, Yan J Q, Lu W F, et al. Mass production of tooling product families via modular feature-based design to manufacturing collaboration in PLM[J]. Journal of Intelligent Manufacturing, 2007, 18(1): 185-195.
77) Wang X H, Ming X G, Yan J Q, et al. Collaborative design and manufacturing process planning in tooling industry[J]. International Journal of Computer Applications in Technology, 2007, 30(3): 221-234.
78) Ni Q, Lu W F, Yarlagadda P K D V, Ming X G. Business information modeling for process integration in the mold making industry[J]. Robotics and Computer-Integrated Manufacturing, 2007, 23(2): 195-207.
79) Ni Q, Lu W F, Yarlagadda P K D V, Ming X G. A collaborative engine for enterprise application integration[J]. Computers in Industry, 2006, 57(7): 640-652.
80) He W, Ming X G, Ni Q F, et al. A unified product structure management for enterprise business process integration throughout the product lifecycle[J]. International journal of production research, 2006, 44(09): 1757-1776.
81) Ming X G, Yan J Q, Lu W F, et al. Technology solutions for collaborative product lifecycle management–status review and future trend[J]. Concurrent Engineering, 2005, 13(4): 311-319.
82) Ming, X. G., Yan, J. Q., Lu, W. F., Ma, D. Z., Process-Oriented Product Lifecycle Management for Customer-Centric Virtual Enterprise, International Journal of Agile Manufacturing, Vol. 7, No. 2, 2004, pp.1-9.
83) Ming, X. G., Ong, S. K., Lu, W. F., Nee, A. Y. C., 2004, A Framework for an Integrated Collaborative Manufacturing System for the Tooling Industry, International Journal of Agile Manufacturing, Vol. 7, No. 1, pp.9-21.
84) Ming, X. G. et al., 2001, Intelligent approaches to tolerance allocation and manufacturing operations selection in process planning, Journal of Materials Processing Technology, Vol. 117, 75-83.
85) Ming, X. G. et al, 2000, Intelligent setup planning in manufacturing by the neural networks based approach, Journal of Intelligent Manufacturing, Vol. 11, No. 3, 311-331.
86) Ming, X. G. et al, 2000, A Hybrid-Genetic-Hopfield based approach to optimal process plan selection, International Journal of Production Research, Vol. 38, No. 8, 1823-1839.
87) Ming, X. G. et al, 1999, Efficiency of applying Hopfield neural networks with simulated annealing and genetic algorithms for getting optimal solution to m-partite graph problem, International Journal of Computer Applications in Technology, Vol. 12, No. 6, 339-348.
88) Ming, X. G., Yan, J. Q. et al, 1999, A hybrid intelligent inference model for process planning in manufacturing, Integrated Manufacturing Systems, Vol. 10, No. 6, 343-53.
89) Ming, X. G. et al, 1998, Efficiency of applying Hopfield neural networks with simulated annealing and genetic algorithms for getting optimal solution to m-partite graph problem, International Journal of Materials and Product Technology, Vol. 13, No. 3-6, 195-213.
90) Ming, X. G., Yan, J. Q. et al, 1998, A PDES/STEP-based information model for computer-aided process planning, Robotics and Computer-Integrated Manufacturing, Vol. 14, No. 5-6, 347-361.
91) Chan, F. T. S., Mak, K. L, Luong, L. H. S, Ming, X. G., 1998, Machine-component grouping using genetic algorithms. Robotics & Computer-Integrated Manufacturing, Vol.14, No.5-6, 339-346.
92) Ming, X. G., Yan, J. Q., Ma, D. Z., Zhang, H. Q. et al, 1997, A hybrid-expert-neural based function model for CAPP, International Journal of Computer Integrated Manufacturing, 10(1-4), 105-116.

Published Books (in Chinese):
1) Ming Xinguo, Kong Fanbin, He Lina. Modular product development for customer options. Beijing: Machinery Industry Press, 2017.
2) Ming Xinguo, Yu Feng, Li Wei. Product Innovation of Industrial Enterprises. Beijing: Machinery Industry Press, 2016.
3) Ming Xinguo, Wang Pengpeng, Xu Zhitao. Industrial products and service value creation. Beijing: Machinery Industry Press, 2015.
4) Ming Xinguo, Yu Feng, Wang Pengpeng. The construction of service-oriented manufacturing system and case study. Shanghai: Shanghai Jiao Tong University Press, 2011.

Course Name：Lean Enterprise Management
Teaching Target: Master/PhD students
Credit Hour：54
Credit：3

Course Name：Logistics and Supply Chain Management (In Chinese)
Teaching Target: Master/PhD students
Credit Hour：35
Credit：2

Course Name：Industrial Engineering English
Teaching Target: Master/PhD students
Credit Hour：36
Credit：2

Course Name：Product Design and Development (In Chinese)
Teaching Target: Industry Engineers, Master/PhD students
Credit Hour：36
Credit：2

Course Name：Creative Thinking and Modern Design (Participated, In Chinese)
Teaching Target: Undergraduate Students
Credit Hour：36
Credit：2

Software Name: Supplier-collaborated Product Portfolio Management System V1.0, Registration Number: 2008SR00213.

1 Consultant

May 2007, Science and Technology Consultant, TongZhou District， Nantong City, Jiangshu Province, P. R. of China.
December 2009，Member of Shanghai Information Expert Committee, Shanghai Municipal Government, P. R. of China.
February 2017: Vice Chairman of China Service-oriented Manufacturing Alliance and Vice Chairman of the Committee of Experts.
May 2017: Member of the China Personalization Alliance Expert Group.
August 2017: Working Group Expert for the Revision of Guidelines for the construction of the National Intelligent Manufacturing Standards System.

2 Membership

2006, Senior Member, Chinese Mechanical Engineering Society, China.
2006, Fellow Member, Mechanical Automation Division, Chinese Mechanical Engineering Society, China.
2006, Fellow Member, Manufacturing Technology Division, Chinese Automation Society, China.
2008, Board Member, Shanghai Standard Committee.

3 International Journal (Past & Present)

Member of editorial review board, Concurrent Engineering: Research and Applications (http://cer.sagepub.com).
Member of editorial board, International Journal of Computer Applications in Technology (www.inderscience.com/ijcat).
Member of editorial board, International Journal of Product Development (www.inderscience.com/ijpd).
Member of editorial board, Journal of the Chinese Institute of Industrial Engineers (http://www.jciie.ciie.org.tw/).
Member of editorial board, Business Process Management Journal, (www.emeraldinsight.com/bpmj.htm).

4 International Conference

July 2010, Program Committee Member, 7th International Conference on Product Lifecycle Management. July 2010, Germany (http://cl2m.com/news/plm10-call-papers ).
July 2008, Program Committee Member, 5th International Conference on Product Lifecycle Management. July 2008, Soul, Korea (http://www.plm08.org/ ).
Mar 2007, Program Committee Member, 3rd International Conference on Interoperability for Enterprise Software and Applications. March 26-30 2007，Madeira Island, Portugal (http://www.i-esa.org ).
Sep 2006, Co-Chair of Session on Semantic Representations for Product Information, Co-Chair of Session on Design Synthesis and Optimization, 2006 ASME International Design Engineering Technical Conferences & Computers in Egninerring Conference, September 10-13, 2006. Philadelphia, Pennsylvania, USA (http://www.asmeconferences.org/IDETC06/).
Aug 2006, Member of Conference Organization Committee, International Mechanisms and Machine Science Conference, China 2006 (CCMMS2006), August 14-17, 2006, Yinchuan, P.R. China.
Aug 2006, Co-Chair of Session of Product Lifecycle Management (http://www.simtech.a-star.edu.sg/indin2006/ss04.html), Member of International Program Committee (http://www.simtech.a-star.edu.sg/indin2006/international_committee.html), 2006 4th International IEEE Conference on Industrial Informatics, 16-18 August 2006, Grand Copthorne Waterfront Hotel, Singapore.
Jul 2006, Member of International Program Committee, 2006 International Conference on Product Lifecycle Management, Bangalore, Karnataka, India (http://www.cpdm.iisc.ernet.in/plm06/index.htm ), 10-12 July 2006.
Sep 2005, Co-Chair, Engineering Ontology, ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 24-28, 2005, Long Beach, California, USA (http://www.asmeconferences.org/idetc2005 ).
Aug 2005, Member of International Program Committee, 2005 IEEE International Conference on Service Operations and Logistics, and Informatics, Beijing, China (http://www.psoi.org/).
July 2005, Member of International Program Committee, Session Chair, Collaborative Product Lifecycle Modeling, Integration and Management, 12th International Conference on Concurrent Engineering: Research and Application, Dallas, USA (http://www.ce2005.org).
May 2005, Keynote Speaker, “Collaborative Product Lifecycle Management (PLM) for Continuous Improvement” 2005 The 16th International Exhibition on Precision Engineering, Machine Tools and Metalworking Technology (MTA2005), Symposium on Precision Engineering, Singapore (http://www.mta-asia.com/mta2005/conf_symposium2.html).
July 2004, Member of International Program Committee, Session Chair, Product Lifecycle Management, 11th International Conference on Concurrent Engineering: Research and Application, Beijing, P. R. of China (http://www.ce2004.org).
December 2003, Member of International Academic Committee, Session Chair, PLM Discussion Panel Member, International Conference on Agile Manufacturing (ICAM2003), Beijing, P. R. of China (http://www.buaa.edu.cn/gjhy/icam2003.htm).
July 2003, Track Co-Chair and Session Co-Chair, 10th International Conference on Concurrent Engineering: Research and Application, Portugal (http://isg.uninova.pt/ce2003/).

2005, Shanghai Pu Jiang Program.
2025, Member of NAAI (National Academy of Artificial Intelligence of USA).